How do I fix error code tC1 on a Samsung washers?

1. undefined: 1. Check the connections for the washing heater temperature sensor connector 2. undefined: 2. Check washing temperature sensor resistance — normal: 11.040 kOhm to 13.001 kOhm at 24 to 26°C 3. undefined: 3. If the washing heater temperature sensor has a functional error, replace it 4. undefined: 4. If the error persists, replace the main PBA

Samsung Washers

Error Code tC1

Q: What does error code tC1 mean on a Samsung washers?

The water temperature sensor is not reading correctly Washing temperature sensor fault; Connector connected incorrectly or disconnected; Water level sensor operating without water due to freezing; Temperature sensor detects 100 to 150°C; Main PCB fault

The water temperature sensor is not reading correctly

Moderate

Address soon - your appliance may not work properly

Also displayed as: tC1

What This Means

Washing temperature sensor fault; Connector connected incorrectly or disconnected; Water level sensor operating without water due to freezing; Temperature sensor detects 100 to 150°C; Main PCB fault

What actually causes this:

The temperature sensor connector came loose or the sensor itself failed

First Thing to Check

Unplug the washer for 60 seconds, then restart

Parts Involved

Washing Temperature SensorMain PBA

How to Fix

1
1. Check the connections for the washing heater temperature sensor connector
2
2. Check washing temperature sensor resistance — normal: 11.040 kOhm to 13.001 kOhm at 24 to 26°C
3
3. If the washing heater temperature sensor has a functional error, replace it
4
4. If the error persists, replace the main PBA