Error Code tC2
The dryer temperature sensor is not reading correctly
Moderate
Address soon - your appliance may not work properly
Also displayed as: tC2
What This Means
Duct assembly fan housing temperature sensor fault (internal short-circuit or wire disconnection); Connector out of place or contact error; Main PCB fault; Freezing in winter
What actually causes this:
The dryer temperature sensor wiring came loose or the sensor failed internally
First Thing to Check
Unplug the washer for 60 seconds, then restart
Parts Involved
How to Fix
- 1
1. Check the connections for the dry heater temperature sensor connector
- 2
2. If the dry heater temperature sensor has a functional error, replace it
- 3
3. If the error persists, replace the main PBA
This Error Applies To
Samsung WW25B6900AW Series Washers
Related Error Codes
The washer's control board cannot properly measure motor current
The detergent dispenser motor is jammed
The detergent dispenser motor has stopped responding
The fabric softener dispenser motor is jammed
The fabric softener dispenser motor has stopped responding
The sensor that detects the dispenser motor movement has failed
The sensor that measures how much detergent is left has failed
The sensor that measures how much fabric softener is left has failed