Error Code F-8
Shorted Probe Sensor — oven meat probe sensor short error
Moderate
Address soon - your appliance may not work properly
What This Means
Probe touching the oven side panel (metal-to-metal short); Incorrect wiring (white and black wires swapped); Failed probe sensor; Failed Main PCB
How to Fix
- 1
Disconnect power
- 2
Check if the probe is touching the oven side panel — if so, separate probe from side panel
- 3
Reconnect power and check DC input at Main PCB pins 1 and 2 of CN07 — should be 5V DC
- 4
If 5V DC is not present, check wiring — verify white and black wires are connected at proper locations
- 5
If wiring is incorrect, reconnect at proper locations; if harness is defective, replace it
- 6
If probe is not touching side panel and wiring is correct, replace the probe sensor
- 7
If problem persists, replace Main PCB
Other Error Codes for LSGL6337D
Shorted Sensor — oven thermistor is shorted for over 1 minute during cooking
Oven Hot — oven temperature exceeds 650°F continuously for 2 minutes during cooking (excludes self-clean)
Opened Sensor — oven thermistor (sensor) remains open for over 1 minute during cooking
Key Shorted Error — one or more control keys continuously shorted for over 60 seconds
No Heating — oven starting temperature does not exceed 150°F and oven temperature does not rise above starting temperature for over 5 minutes during preheating, with door closed
Stalled Fan Lock Error — cooling fan is stalled during self-clean cycle
Door Lock Fail — door locking motor failure during self-clean or lock operation
Convection Fan Error — convection fan operation cannot be detected for over 1 minute during any mode requiring the upper convection fan