Error Code -tE-
Touch control communication failure
Moderate
Address soon - your appliance may not work properly
Also displayed as: -tE-
What This Means
Connector (TE201) of SUB PCB not inserted; Touch glass cable disconnected; Harness damage between touch control and sub PCB; Sub PCB failure
What actually causes this:
Disconnected touch panel cable or failed touch control board
First Thing to Check
Verify TE201 connector on sub PCB is fully inserted and harness is seated at touch glass
Parts Involved
How to Fix
- 1
Disconnect power
- 2
Check whether connector (TE201) of SUB PCB has been inserted
- 3
Verify Touch glass connector is fully seated
- 4
Inspect harness for damage or loose connections
Other Error Codes for NE58K9500SG
Main and sub control boards cannot communicate
Keypad circuit short detected
Meat probe is shorted or has short circuit
Keypad has a short circuit
Temperature sensor wires are shorted together
Oven partition divider switch is not responding
Oven temperature is dangerously high
Door lock mechanism is not responding