Error Code E-dE
Oven partition divider switch is not responding
Moderate
Address soon - your appliance may not work properly
Also displayed as: E-dE
What This Means
Loose or disconnected partition switch harness; Failed partition switch element; Abnormal partition switch resistance; Main PCB CN401 connector issue; Main PCB failure
What actually causes this:
Loose connector, failed switch, or PCB issue
First Thing to Check
Check partition switch harness is connected to CN401 on main PCB
Parts Involved
How to Fix
- 1
Disconnect power and open back cover
- 2
Check harness connected to partition switch
- 3
Measure partition switch resistance - should be normal value
- 4
Verify CN401 connector on main PCB is properly seated
- 5
Test harness continuity from switch to main PCB
Other Error Codes for NE58K9500SG
Main and sub control boards cannot communicate
Keypad circuit short detected
Meat probe is shorted or has short circuit
Keypad has a short circuit
Temperature sensor wires are shorted together
Oven temperature is dangerously high
Door lock mechanism is not responding
Touch control panel is not communicating with sub board