Name: Samsung NX58J5600SG
Brand: Samsung

Question 1

What does error code -SE- mean on Samsung NX58J5600SG?

Accepted Answer

Shorted key — keypad has been pressed continuously for 10 minutes. Cause: Stuck or shorted membrane keypad; Short circuit in membrane wire harness; Short circuit between connector CN301 pins on main PCB; Short between membrane keypad and membrane bracket.

Question 2

What does error code E-08 mean on Samsung NX58J5600SG?

Accepted Answer

Oven temperature rises too slowly — fails to reach 125 degrees F (52 degrees C) within 10 minutes at room temperature. Cause: Oven fails to reach 125°F (52°C) within 10 minutes at room temperature; Faulty oven temperature sensor; Defective bake or broil burner; Incorrect orifice sizing for gas type.

Question 3

What does error code E-0A mean on Samsung NX58J5600SG?

Accepted Answer

Oven overheating error — oven temperature reaches 650 degrees F (343 degrees C) in any cooking function except Self Clean. Cause: Temperature reaches 650°F (343°C) in cooking function except Self Clean; Faulty oven temperature sensor; Stuck or failed broil or bake burner; Defective relay assembly.

Question 4

What does error code E-0E mean on Samsung NX58J5600SG?

Accepted Answer

Door locking error — door lock is in the wrong position after 1 minute. Cause: Motorized door lock assembly malfunction; Faulty door locking switch; Disconnected or damaged harness to door lock motor; Defective PCB relay.

Question 5

What does error code E-27 mean on Samsung NX58J5600SG?

Accepted Answer

Oven temperature sensor open (resistance over 2950 ohms). Cause: Sensor resistance exceeds 2950 ohms; Damaged or disconnected sensor wires; Faulty sensor connector on PCB.

Question 6

What does error code E-28 mean on Samsung NX58J5600SG?

Accepted Answer

Oven temperature sensor shorted (resistance under 930 ohms). Cause: Sensor resistance under 930 ohms; Short circuit in sensor wire harness; Faulty sensor connector.

Question 7

What does error code SE mean on Samsung NX58J5600SG?

Accepted Answer

Shorted key - Control panel membrane keypad pressed for 10 minutes. Cause: Keypad stuck or jammed; Short circuit in membrane control harness; Faulty PCB connector; Defective membrane control board.

NX58J5600SG

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
-SE-	Shorted key — keypad has been pressed continuously for 10 minutes	Moderate
E-08	Oven temperature rises too slowly — fails to reach 125 degrees F (52 degrees C) within 10 minutes at room temperature	Moderate
E-0A	Oven overheating error — oven temperature reaches 650 degrees F (343 degrees C) in any cooking function except Self Clean	Moderate
E-0E	Door locking error — door lock is in the wrong position after 1 minute	Moderate
E-27	Oven temperature sensor open (resistance over 2950 ohms)	Moderate
E-28	Oven temperature sensor shorted (resistance under 930 ohms)	Moderate
SE	Shorted key - Control panel membrane keypad pressed for 10 minutes	Moderate