Error Code -dC-
Divider sensing information — Flex Duo divider insert or remove state mismatch
Moderate
Address soon - your appliance may not work properly
What This Means
Divider present in single mode or absent in twin or double mode; Housing connector disconnected; Failed divider sensing switch
How to Fix
- 1
If single cavity mode: remove the divider
- 2
If double cavity mode: insert the divider
- 3
Check and reconnect the housing connector
- 4
Check divider sensing switch function; replace switch if faulty
Other Error Codes for NX58J7750SS
PCB sensor opened or shorted — oven sensor error at PCB side
Shorted key — keypad short circuit detected
Oven heating over — oven temperature has risen excessively, triggered at 650 F (343 C) in any cooking function except self-clean
PCB ambient temperature high — safety error
Door locking information — door lock mechanism error
BLDC motor operation information — cooling fan motor or air intake motor error
Oven sensor opened (over 2950 ohm) or oven sensor shorted (under 930 ohm)
Main-to-Touch communication information — communication error between Main PCB and Touch PCB