Error Code E IC
Defect of Mini Cubed ice maker kit — malfunction of Mini Cubed ice maker motor
Moderate
Address soon - your appliance may not work properly
Also displayed as: E IC
How to Fix
- 1
Step 1: Enter test mode by pressing test switch on Mini Cubed ice maker for more than 0.5 second.
- 2
Step 2: Observe if ice maker motor runs through test cycle: initial → ice ejection → water supply → water distribution.
- 3
Step 3: If motor does not move, check wiring harness from Main PCB to Mini Cubed ice maker.
- 4
Step 4: Measure motor winding resistance. Compare to specification.
- 5
Step 5: If motor resistance is abnormal, replace Mini Cubed ice maker motor assembly.
- 6
Step 6: If motor resistance is correct but motor does not respond, replace Main PCB.
Other Error Codes for LRYXC2606B
Defect of ice maker kit — malfunction of in-door ice maker motor
Defect of flow meter or lack of water supply — malfunction of flow meter. Check connection of flow meter and water supply.
Defect of freezer defrost sensor — short-circuit or disconnection of defrost sensor
PSD (Position Sensor Device) sensor error — malfunction of PSD sensor
Defect of freezer craft ice maker sensor — short-circuit or disconnection of craft ice maker sensor
Defect of refrigerator sensor — short-circuit or disconnection of refrigerator sensor
Defect of freezer sensor — short-circuit or disconnection of freezer sensor
Defect of ice-room sensor or ice maker sensor — short-circuit or disconnection