Error Code E It
Defect of ice maker kit — malfunction of in-door ice maker motor
Moderate
Address soon - your appliance may not work properly
Also displayed as: E It
How to Fix
- 1
Step 1: Press and hold the FILL key for 3 seconds to enter icemaker test mode.
- 2
Step 2: Observe if icemaker runs 2 stages: harvest and fill water. If it completes both stages, mechanism is normal.
- 3
Step 3: If mechanism does not cycle, check wiring harness connection from Main PCB to icemaker.
- 4
Step 4: Check icemaker motor resistance. Replace icemaker unit if motor is defective.
- 5
Step 5: If harness is good and motor resistance is correct but error persists, replace Main PCB.
Other Error Codes for LRYXC2606B
Defect of flow meter or lack of water supply — malfunction of flow meter. Check connection of flow meter and water supply.
Defect of freezer defrost sensor — short-circuit or disconnection of defrost sensor
PSD (Position Sensor Device) sensor error — malfunction of PSD sensor
Defect of freezer craft ice maker sensor — short-circuit or disconnection of craft ice maker sensor
Defect of Mini Cubed ice maker kit — malfunction of Mini Cubed ice maker motor
Defect of refrigerator sensor — short-circuit or disconnection of refrigerator sensor
Defect of freezer sensor — short-circuit or disconnection of freezer sensor
Defect of ice-room sensor or ice maker sensor — short-circuit or disconnection