Error Code E FS
Defect of freezer sensor — short-circuit or disconnection of freezer sensor
Moderate
Address soon - your appliance may not work properly
Also displayed as: E FS
How to Fix
- 1
Step 1: Check connector between Main PCB and sensor. If disconnected or loose, reconnect or repair connector and recheck.
- 2
Step 2: Measure sensor resistance at CON8 22nd Pin ~ 21st Pin. If resistance is 0 ohm (short circuit), replace the sensor.
- 3
Step 3: If resistance reads OL/infinite (open circuit), proceed to step 6.
- 4
Step 4: Check the sensor resistance against the temperature-resistance table. If values match the table, explain to customer — refrigerator is operating normally.
- 5
Step 5: If resistance does not match table, replace the sensor.
- 6
Step 6: Check sensor connection at the sensor housing. If sensor connection is normal, replace the refrigerator PCB assembly.
- 7
Step 7: If sensor connection is not normal, reconnect or repair the connector.
Other Error Codes for LRYXC2606D
Defect of ice-room sensor or ice maker sensor — short-circuit or disconnection
Defect of freezer defrost sensor — short-circuit or disconnection of defrost sensor
Defect of UVC LED — UVC LED disconnected or UVC LED failure. Check UVC LED connection.
Defect of room temperature sensor (RT sensor) — short-circuit or disconnection
Defect of humidity sensor — short-circuit or disconnection of humidity sensor
Defect of flow meter or lack of water supply — malfunction of flow meter. Check connection of flow meter and water supply.
Defect of freezer craft ice maker sensor — short-circuit or disconnection of craft ice maker sensor
Defect of Mini Cubed ice maker kit — malfunction of Mini Cubed ice maker motor