Error Code E rt
Defect of room temperature sensor (RT sensor) — short-circuit or disconnection
Moderate
Address soon - your appliance may not work properly
Also displayed as: E rt
How to Fix
- 1
Step 1: Check connector between Main PCB and RT sensor for loose or disconnected harness.
- 2
Step 2: Measure RT sensor resistance. At room temperature (~70°F/21°C), sensor should read approximately 10kΩ.
- 3
Step 3: If resistance is 0 ohm (short circuit), replace the RT sensor.
- 4
Step 4: If resistance reads OL/infinite (open circuit), replace the RT sensor.
- 5
Step 5: If resistance is within spec but error persists, replace Main PCB.
Other Error Codes for LRYXC2606D
Defect of freezer sensor — short-circuit or disconnection of freezer sensor
Defect of ice-room sensor or ice maker sensor — short-circuit or disconnection
Defect of freezer defrost sensor — short-circuit or disconnection of defrost sensor
Defect of UVC LED — UVC LED disconnected or UVC LED failure. Check UVC LED connection.
Defect of humidity sensor — short-circuit or disconnection of humidity sensor
Defect of flow meter or lack of water supply — malfunction of flow meter. Check connection of flow meter and water supply.
Defect of freezer craft ice maker sensor — short-circuit or disconnection of craft ice maker sensor
Defect of Mini Cubed ice maker kit — malfunction of Mini Cubed ice maker motor