Error Code 13E
Humidity sensor failure or circuit open
Moderate
Address soon - your appliance may not work properly
Also displayed as: 13 E
What This Means
Sensor housing separated or damaged; Contact error at connector; Disconnection or short circuit in wiring
What actually causes this:
Humidity sensor housing cracks from thermal cycling or moisture damage
First Thing to Check
Look for visible cracks in humidity sensor housing
Parts Involved
How to Fix
- 1
Check voltage between MAIN PCB CN30 #7 and #9
- 2
Voltage should be within 4.5V to 1.0V range
- 3
Inspect sensor housing for damage
Other Error Codes for RH25H5611SR
Refrigerator compartment temperature too warm
Compressor power supply internal module failure
Freezer defrost sensor malfunction or open circuit
Ice maker sensor malfunction or open circuit
Condenser cooling fan motor failure or no speed feedback
Main control board cannot communicate with display panel
Ice maker cannot eject ice cubes or crushed ice
Freezer defrost heater circuit fault or heater stuck on