Error Code 8E
Ice maker sensor malfunction or open circuit
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8 E
What This Means
Connector slipped out or open contact; Wire cut or short circuited; Abnormal temperature sensing
What actually causes this:
Ice maker sensor connector becomes loose or thermistor fails
First Thing to Check
Verify CN90 #3 connection on main PCB is secure
Parts Involved
How to Fix
- 1
Check voltage between MAIN PCB CN90 #3 and #8
- 2
Voltage should be within 4.5V to 1.0V range
Other Error Codes for RH25H5611SR
Refrigerator compartment temperature too warm
Compressor power supply internal module failure
Freezer defrost sensor malfunction or open circuit
Humidity sensor failure or circuit open
Condenser cooling fan motor failure or no speed feedback
Main control board cannot communicate with display panel
Ice maker cannot eject ice cubes or crushed ice
Freezer defrost heater circuit fault or heater stuck on