How do I fix error code 13E on my Samsung RS22HDHPNBC?

1. undefined: Check voltage between MAIN PCB CN30 #11 and #8 should be 4.5V~1.0V 2. undefined: Inspect connector seating 3. undefined: Measure humidity sensor resistance 4. undefined: Replace sensor if abnormal

Samsung RS22HDHPNBCRefrigerator

Error Code 13E

Q: What does error code 13E mean on a Samsung RS22HDHPNBC?

Humidity sensor failure Connector slipped out or open contact; Wire cut or short-circuited; Abnormal sensing value

Humidity sensor failure

Minor

Usually easy to fix - may resolve on its own

Also displayed as: 13E

What This Means

Connector slipped out or open contact; Wire cut or short-circuited; Abnormal sensing value

What actually causes this:

Sensor fails from moisture exposure or connector corrosion

First Thing to Check

Check connector CN30 pin 11, ensure it's dry

Parts Involved

Humidity SensorCN30 Connector

How to Fix

1
Check voltage between MAIN PCB CN30 #11 and #8 should be 4.5V~1.0V
2
Inspect connector seating
3
Measure humidity sensor resistance
4
Replace sensor if abnormal

Other Error Codes for RS22HDHPNBC

71E

Freezer temperature critically high

83E

Compressor drawing excessive or abnormal current

21E

Freezer fan motor failure or feedback signal issue

Freezer defrost sensor failure

Freezer sensor failure or wiring issue

25E

Fridge defrost heater malfunction or sensor failure

23E

Condenser fan motor failure or feedback signal issue

41E

Main and panel microcontroller communication failure

Need more help with your Samsung RS22HDHPNBC?