Error Code 06
Ice maker ejection or level detection malfunction
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: Right - ⑦ LED ON
What This Means
Ice maker mechanical failure; Level sensor malfunction; Ejector motor failure; Sensor electrical failure
What actually causes this:
Ice clogs ejector path or sensor gets stuck in frozen position
First Thing to Check
Manually clear any ice blocking ejector path and run test cycle
Parts Involved
How to Fix
- 1
Push test button on Ice Maker Assembly and observe operation
- 2
Check for mechanical obstructions in ice ejector path
- 3
Verify sensor signal at CN90
Other Error Codes for RS25J500DSG
Defrost heater temperature sensing not working
Damper heater not responding or circuit open
Compressor fails to operate or protection activated
Ice maker sensor malfunction or connection issue
Freezer evaporator fan not operating properly
Refrigerator compartment temperature measurement failure
Freezer temperature sensor not responding
Freezer defrost cycle fails or takes too long