Error Code OC
Too much water is in the washer
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
Water level sensor fault; Freezing in winter; Foreign material in water supply valve; Water level sensor defective
What actually causes this:
The water level sensor stopped working
First Thing to Check
Unplug immediately. Restart after water drains.
Parts Involved
How to Fix
- 1
1. Restart after spinning
- 2
2. If water level sensor has functional error, replace it
- 3
3. Check hose for tears/holes
- 4
4. If frozen, use hair dryer and consider relocating
Other Error Codes for WA45T3400AV
The washer isn't getting enough power
The clutch sensor is giving incorrect readings
The control boards can't communicate
The motor controller can't communicate with the main board
The washer is getting too much power
The washer's motor isn't working
The washer isn't filling with water
The washer can't drain the water out