Error Code LE
The washer has detected a water leak
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LE
What This Means
Air hose out of place causing water leakage during spin cycle; Excessive foaming from too much detergent causing water leakage at the front; Connecting hose to detergent drawer connected incorrectly; Foreign material in the DV case; Fault of a hose or incorrect part engagement in the product; Drain bellows clogged with foreign material
What actually causes this:
Using too much detergent caused excessive suds that leaked out, or a hose connection came loose
First Thing to Check
Check around the base of the washer for water — reduce detergent amount on the next load
Parts Involved
How to Fix
- 1
1. Check for any leakage on the base, Hose, Valve, and Tub connections
- 2
2. Take any required action and check for leakage
- 3
3. Check the drain motor operation — if it does not operate normally, replace it
- 4
4. Remove the foreign material from clogged drain bellows
- 5
5. Check for fault of a hose or incorrect part engagement in the product
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for WA50F9A6DSW
The washer cannot detect how much water is in the tub
The washer's motor cannot spin or is detecting a problem
The washer is not getting enough water to fill
The washer cannot pump the water out
The washer's control boards cannot communicate with each other
A button on the control panel appears to be stuck
The washer does not detect the door as properly closed
The washer cannot unlock the door after a cycle