Name: Samsung WA50M7450AW
Brand: Samsung

Question 1

What does error code 1C mean on Samsung WA50M7450AW?

Accepted Answer

The washer can't tell how much water is inside. Cause: Water level sensor hose is damaged (punctured); Water level sensor hose is clogged with foreign material; Water level sensor hose is folded; Too much lubricant applied to the air hose insertion part; Hose engagement error (disengaged); Water level sensor internal soldering fault; Water level sensor terminal is disengaged; Main PBA fault; PBA connector terminal is not connected.

Question 2

What does error code 3C mean on Samsung WA50M7450AW?

Accepted Answer

The washer's motor can't spin properly. Cause: Motor spin net is not engaged; Motor internal coil is damaged (short-circuited or cut); Hall sensor terminal is not connected; Foreign material (a screw) has entered the motor; Motor overloaded due to too much laundry; Motor hall sensor terminal is not connected; Main PBA fault; Motor driving error from the PBA (weak signal); Unstable relay operation; Erroneous operating signals from the motor hall sensor; IPM terminal of the main PBA is not connected; DD motor cover is out of place; PCB housing terminal is not connected; DD motor fault.

Question 3

What does error code 4C mean on Samsung WA50M7450AW?

Accepted Answer

The washer isn't getting water when it needs it. Cause: Foreign material entering the water supply valve; Water supply valve terminal is not connected (wire disconnected); Warm water and rinse connectors are wrongly connected to each other; PCB terminal from the drain hose to the detergent drawer is not connected; Transparent hose is folded or torn; Cold and warm water supply hoses are wrongly engaged into each other; Main PBA fault; Water supply blocked due to alien substance in the valve; Frozen water supply.

Question 4

What does error code 4C2 mean on Samsung WA50M7450AW?

Accepted Answer

The incoming water is too hot for the selected cycle. Cause: Water temperature supplied through the dry valve during drying cycle exceeds 70°C; Water temperature sensed as higher than 50°C in Wool or Lingerie courses; Hot water supply connected to cold water inlet; Water heater set too high.

Question 5

What does error code 5C mean on Samsung WA50M7450AW?

Accepted Answer

The washer can't pump the water out. Cause: Drain pump motor impeller is damaged internally; Wrong voltage supplied to the parts; Drain pump part fault; Freezing in the winter season; Drain hose is clogged (injection error, foreign material); Clogged with foreign material inside the drain pump; Water pump terminal is not connected; Foreign objects collected inside drain pump assembly (rubber bands, bills, cotton, hair pins, coins).

Question 6

What does error code 8C mean on Samsung WA50M7450AW?

Accepted Answer

The vibration sensor board has a problem. Cause: Main PBA wire connection error; PBA silver nano part malfunction; MEMS PBA is defective; Wire disconnection.

Question 7

What does error code 8C1 mean on Samsung WA50M7450AW?

Accepted Answer

The vibration sensor board is sending bad data. Cause: MEMS PBA data error; Wire connection error; MEMS PBA defective.

Question 8

What does error code 8C2 mean on Samsung WA50M7450AW?

Accepted Answer

The vibration sensor board has failed. Cause: MEMS PBA is defective; Wire connection error.

Question 9

What does error code 9C1 mean on Samsung WA50M7450AW?

Accepted Answer

The washer isn't getting enough electrical power. Cause: Consumer's power conditions are unstable; Under voltage being supplied; Plug receptacle causing voltage drop; Connecting wire longer than 1m causing momentary low voltage drop up to 10V; Main PBA fault (sometimes).

Question 10

What does error code 9C2 mean on Samsung WA50M7450AW?

Accepted Answer

The washer is getting too much electrical power. Cause: Consumer's power conditions are unstable; Over voltage being supplied; Voltage spikes or surges on the circuit; Main PBA fault (sometimes).

WA50M7450AW

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
1C	The washer can't tell how much water is inside	Moderate
3C	The washer's motor can't spin properly	Moderate
4C	The washer isn't getting water when it needs it	Moderate
4C2	The incoming water is too hot for the selected cycle	Moderate
5C	The washer can't pump the water out	Moderate
8C	The vibration sensor board has a problem	Moderate
8C1	The vibration sensor board is sending bad data	Moderate
8C2	The vibration sensor board has failed	Moderate