Error Code dC1
The door latch mechanism itself is broken or disconnected
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC1
What This Means
Door lock switch unit is not inserted; Door lock switch unit is damaged; Wire is disconnected; Door lock switch terminal is broken; Intermittent electric wire leakage; Main PCB fault
What actually causes this:
The door lock mechanism is worn out, broken, or a wire came loose
First Thing to Check
Open the lid and look at the latch mechanism — check if anything looks broken or out of place
Parts Involved
How to Fix
- 1
1. Check whether door lock switch unit is inserted properly
- 2
2. Check whether door lock switch unit is damaged
- 3
3. Check the disconnection of the wire
- 4
4. Check Lock/Unlock Contact resistance. Lock: White-Red wire, Unlock: White-Blue wire. Resistance between terminals of Door Lock/Unlock: approx. 0.2 ohms
- 5
5. If the door lock switch unit is defective, replace it
- 6
6. If the main PCB is defective, replace it
Other Error Codes for WA50M7450AW
The washer's WiFi module isn't communicating properly
The washer's display screen isn't communicating properly
The washer's motor controller isn't communicating properly
The vibration sensor board has a problem
The washer's door release module isn't communicating properly
The washer can't tell how much water is inside
The washer's motor can't spin properly
The washer isn't getting water when it needs it