Error Code 3C
The washer motor is not running properly.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 3C
What This Means
Washing motor defective or failed; Motor rotor or stator damaged; Motor cover stator exposed to moisture or alien substance; Motor connector terminal connections faulty; Motor winding coil broken; Main PCB control circuit defective
What actually causes this:
Usually the motor itself has failed or a wire connection to the motor has come loose due to vibration over time.
First Thing to Check
Try restarting the wash cycle. If it fails again, the motor likely needs professional attention.
Parts Involved
How to Fix
- 1
1. Unplug the motor connector and measure resistance between the three terminals on the motor.
- 2
2. Expected resistance: 19.3 ohms at 25 degrees C.
- 3
3. Check the motor connector terminal connections for looseness or corrosion.
- 4
4. Check if the motor coil is broken.
- 5
5. Check if the motor cover stator is damp or contaminated with foreign substance.
- 6
6. If the motor is defective, replace it.
- 7
7. If the PBA control circuit is defective, replace the PBA.
Other Error Codes for WA51DG5505AWUS
The water level sensor is not reading correctly.
The washer cannot pump the water out.
The washer's vibration sensor is not working.
The washer is getting too much voltage from the outlet.
The washer's control boards cannot talk to each other.
The washer thinks the lid is open.
The door lock mechanism is not working correctly.
The door lock cannot release to let you open the lid.