Error Code OC
Too much water has filled the washer tub.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
Water level sensor defective; Water continuously supplied due to freezing or foreign materials in water supply valve; Water supply valve stuck open
What actually causes this:
The water inlet valve is stuck open and keeps filling the tub past the correct level, usually because of a failed water level sensor or debris in the valve.
First Thing to Check
Turn off the washer immediately and unplug it. Check for water on the floor and mop up any overflow.
Parts Involved
How to Fix
- 1
1. Restart after spinning to drain excess water.
- 2
2. Turn off the washer, unplug it, wait one minute, then plug back in.
- 3
3. If the error remains, the water level sensor should be replaced.
- 4
4. Check for freezing or foreign materials in the water supply valve.
Other Error Codes for WA51DG5505AWUS
The water level sensor is not reading correctly.
The washer cannot pump the water out.
The washer's vibration sensor is not working.
The washer is getting too much voltage from the outlet.
The washer's control boards cannot talk to each other.
The washer thinks the lid is open.
The door lock mechanism is not working correctly.
The door lock cannot release to let you open the lid.