Error Code PC1
The washer's clutch sensor is giving a bad signal.
Moderate
Address soon - your appliance may not work properly
Also displayed as: PC1
What This Means
Clutch hall sensor signal incorrect after position detection; Clutch hall sensor wiring issue; Clutch mechanism damaged; Main PCB defective
What actually causes this:
The position sensor on the clutch is sending garbled signals, often due to a loose wire or worn sensor.
First Thing to Check
Unplug the washer, wait one minute, plug it back in, and try again.
Parts Involved
How to Fix
- 1
1. Turn off the washer, unplug it, wait one minute, and plug it back in.
- 2
2. Check clutch hall sensor wiring and connections.
- 3
3. Inspect clutch mechanism for physical damage.
- 4
4. If the error remains, replace the clutch assembly or main PBA.
Other Error Codes for WA52DG5500AVUS
The water level sensor is not reading correctly.
The washer cannot pump the water out.
The washer's vibration sensor is not working.
The washer is getting too much voltage from the outlet.
The washer's control boards cannot talk to each other.
The washer thinks the lid is open.
The door lock mechanism is not working correctly.
The door lock cannot release to let you open the lid.