Error Code 4C2
The water hoses are connected to the wrong faucets.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Cold water supply hose connected to hot water tap; Hot and cold hoses swapped at installation
What actually causes this:
The hot and cold water hoses were accidentally swapped during installation or after being reconnected.
First Thing to Check
Look at the back of the washer and check which hose goes to which faucet. The cold hose should go to the cold tap.
Parts Involved
How to Fix
- 1
1. Verify the cold water supply hose is firmly connected to the cold water tap.
- 2
2. Verify the hot water supply hose is connected to the hot water tap.
- 3
3. Swap hoses if connected incorrectly.
Other Error Codes for WA52DG5500AWUS
The water level sensor is not reading correctly.
The washer cannot pump the water out.
The washer's vibration sensor is not working.
The washer is getting too much voltage from the outlet.
The washer's control boards cannot talk to each other.
The washer thinks the lid is open.
The door lock mechanism is not working correctly.
The door lock cannot release to let you open the lid.