Error Code AC3
Your washer's door-related module has lost connection.
Moderate
Address soon - your appliance may not work properly
Also displayed as: AC3
What This Means
Signals between the DR Module and main PBAs are not sensed because of communication check; Incorrect or loose connector connections; Faulty soldering on DR Module
What actually causes this:
A loose internal cable connection to the door module.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check connector connections between the DR Module and main PBA carefully
- 2
2. Check for incorrect or loose connections
- 3
3. Remove the DR Module and check for any faulty soldering
Other Error Codes for WA52J8700AP
Your washer's leak sensor has been triggered.
Your washer's motor speed controller has lost connection to the main board.
Your washer is overfilling with water.
Your washer's power module is overheating.
Your washer has detected a water leak.
Your washer's main computer chip has failed.
Your washer's motor cannot spin properly.
Your washer cannot pump the water out.