Error Code AC5
Your washer's display screen has lost connection to the main board.
Moderate
Address soon - your appliance may not work properly
Also displayed as: AC5
What This Means
Signals between the LCD Module and main PBAs are not sensed because of communication check; Incorrect or loose connector connections; Faulty soldering on LCD Module
What actually causes this:
The display panel's internal cable connection has come loose.
First Thing to Check
Unplug the washer for 60 seconds, then plug it back in and try again.
Parts Involved
How to Fix
- 1
1. Check connector connections between the LCD Module and main PBA carefully
- 2
2. Check for incorrect or loose connections
- 3
3. Remove the LCD Module and check for any faulty soldering
Other Error Codes for WA52J8700AP
Your washer's leak sensor has been triggered.
Your washer's door-related module has lost connection.
Your washer's motor speed controller has lost connection to the main board.
Your washer is overfilling with water.
Your washer's power module is overheating.
Your washer has detected a water leak.
Your washer's main computer chip has failed.
Your washer's motor cannot spin properly.