Error Code DC2
Your washer's lid lock has overheated from repeated use.
Moderate
Address soon - your appliance may not work properly
Also displayed as: DC2
What This Means
Occurs if the Power switch is turned on/off continually and too much heat is generated
What actually causes this:
Repeatedly turning the washer on and off too quickly, which overheats the door lock mechanism.
First Thing to Check
Unplug the washer and let it cool for 30 minutes before trying again.
Parts Involved
How to Fix
- 1
1. Check the wire disconnection
- 2
2. Check whether the door lock switch unit is damaged
- 3
3. If the door lock switch unit is defective, replace it
- 4
4. If the main PCB is defective, replace it
Other Error Codes for WA52J8700AP
Your washer's leak sensor has been triggered.
Your washer's door-related module has lost connection.
Your washer's motor speed controller has lost connection to the main board.
Your washer is overfilling with water.
Your washer's power module is overheating.
Your washer has detected a water leak.
Your washer's main computer chip has failed.
Your washer's motor cannot spin properly.