Error Code LC1
Your washer's leak sensor has been triggered.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: LC1
What This Means
Leakage sensor is faulty; Actual water leak from various connection points
What actually causes this:
Water has reached the leak sensor at the bottom of the washer, usually from a loose hose or too much detergent.
First Thing to Check
Check the floor around and under the washer for any visible water.
Parts Involved
How to Fix
- 1
1. Check for alien substance such as underwire, coins, etc. in the drain area
- 2
2. Check if the drain motor is defective
- 3
3. Check if water leaks from the tub connection part or internal hose
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for WA52J8700AP
Your washer's door-related module has lost connection.
Your washer's motor speed controller has lost connection to the main board.
Your washer is overfilling with water.
Your washer's power module is overheating.
Your washer has detected a water leak.
Your washer's main computer chip has failed.
Your washer's motor cannot spin properly.
Your washer cannot pump the water out.