Error Code TC4
Your washer's power module is overheating.
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: TC4
What This Means
IPM temperature is abnormally high; Main PCB fault
What actually causes this:
The washer's motor controller is running too hot, possibly from a blocked ventilation area or a failing component.
First Thing to Check
Make sure there is adequate space around the washer for air circulation.
Parts Involved
How to Fix
- 1
1. Check the IPM temperature conditions
- 2
2. Check for Main PCB fault
Other Error Codes for WA52J8700AP
Your washer's leak sensor has been triggered.
Your washer's door-related module has lost connection.
Your washer's motor speed controller has lost connection to the main board.
Your washer is overfilling with water.
Your washer has detected a water leak.
Your washer's main computer chip has failed.
Your washer's motor cannot spin properly.
Your washer cannot pump the water out.