Samsung WA55CG7500AVWasher
Error Code 8C2
The washer's vibration sensor is not working
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C2
What This Means
MEMS PBA is defective; MEMS PBA wire disconnection
What actually causes this:
The vibration sensor board has failed
First Thing to Check
Turn off the washer, wait 2-3 minutes, and turn it back on — if the error persists, it needs service
Parts Involved
MEMS PBAMain PBA
How to Fix
- 1
1. Check wire connections to the MEMS PBA
- 2
2. Replace the MEMS PBA
Other Error Codes for WA55CG7500AV
3C
The washer's motor has stopped working
4C
The washer is not getting any water
9C1
The washer is getting too much voltage from the outlet
9C2
The washer is not getting enough voltage from the outlet
HC1
The heater or temperature sensor has a problem
dC
The washer thinks the lid is open
DC2
The door lock mechanism is not working correctly
OC
The washer has too much water inside