Error Code 4C2
The incoming water is too hot for delicate wash cycles
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Hot water supply temperature exceeds 50 degrees C during Wool or Lingerie cycle; Hot water hose connected to cold water inlet; Temperature sensor fault
What actually causes this:
The hot and cold water hoses are connected to the wrong faucets, so hot water is going where cold water should
First Thing to Check
Check behind the washer — make sure the hot water hose goes to the hot faucet and the cold hose to the cold faucet
Parts Involved
How to Fix
- 1
1. Check that the hot and cold water supply hoses are connected to the correct inlets
- 2
2. Verify the home water heater temperature setting
- 3
3. Check the temperature sensor for proper operation
Other Error Codes for WF45R6300AC
The washer's motor can't spin the drum properly
The door lock mechanism won't engage
The washer detects the door opening while running
The washer has too much water in the tub and is overflowing
There are too many soap suds in the washer
The washer's vibration sensor detected a problem
Your washer's small add-clothes door is not closing properly.
The washer is getting too much electrical power