Error Code 8C1
The washer's vibration sensor detected a problem
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C1
What This Means
Excessive vibration detected by MEMS sensor; Unit not properly leveled; Main PCB fault
What actually causes this:
The washer isn't level on the floor or the shipping bolts from installation were never removed
First Thing to Check
Check if the washer rocks when you press on each corner — adjust the leveling legs until it is perfectly stable
Parts Involved
How to Fix
- 1
1. Check the unit for excessive vibration
- 2
2. Verify the washer is properly leveled
- 3
3. Replace Main PCB if vibration is within normal range
Other Error Codes for WF45R6300AC
The washer's motor can't spin the drum properly
The incoming water is too hot for delicate wash cycles
The door lock mechanism won't engage
The washer detects the door opening while running
The washer has too much water in the tub and is overflowing
There are too many soap suds in the washer
Your washer's small add-clothes door is not closing properly.
The washer is getting too much electrical power