Error Code SF
The washer's main computer chip has failed
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: SF
What This Means
Micro controller operation fail on the Main PCB
What actually causes this:
A power surge or electrical glitch corrupted the main circuit board — sometimes caused by lightning or power outages
First Thing to Check
Unplug the washer for a full minute and then plug it back in — sometimes a power reset clears this error
Parts Involved
How to Fix
- 1
1. Power cycle the washer — unplug for 5 minutes and reconnect
- 2
2. If the error persists, replace the Assy PCB
Other Error Codes for WF45T6000AW
The washer's motor can't spin the drum properly
The incoming water is too hot for delicate wash cycles
The door lock mechanism won't engage
The washer detects the door opening while running
The washer has too much water in the tub and is overflowing
There are too many soap suds in the washer
The washer's vibration sensor detected a problem
Your washer's small add-clothes door is not closing properly.