Error Code OC
The washer thinks there is too much water inside
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: OC
What This Means
Water level sensor fault; Pressure hose folded, cut, or damaged; Freezing in the winter season (frozen hose); Inlet valve stuck open
What actually causes this:
The small hose that measures water level has a crack or is frozen in cold weather
First Thing to Check
Run a Spin Only cycle to drain the excess water, then restart — if it happens again in cold weather, the sensor line may be frozen
Parts Involved
How to Fix
- 1
1. If the water level sensor has a functional error, replace it
- 2
2. Check the hose connected to the water level sensor — verify it is not folded, cut, or damaged
- 3
3. Check whether the hose is frozen (winter season) — use a hair dryer to defrost; consider relocating the unit to a warmer location
- 4
4. Restart after spinning to drain excess water
- 5
5. If the error remains, contact a local Samsung service center
Other Error Codes for WF53BB8900ATUS
The washer's main control board and display board are not communicating
The main control board and motor driver board stopped talking to each other
The water heater or temperature sensor is not working correctly
A very heavy or stiff item is causing the drum to be unbalanced
The drum motor is not spinning properly
The small add-clothes door on top of the main door is not closed
The add-door lock mechanism has failed
The door lock mechanism is not engaging or releasing properly