Error Code 8C2
The washer's vibration sensor has a specific hardware error
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C2 (upper) / 8C2 (lower)
What This Means
MEMS PBA error detected; Data error in MEMS PBA; Wire connection fault
What actually causes this:
The vibration sensor hardware has failed
First Thing to Check
Turn off the washer at the circuit breaker, wait 60 seconds, then turn it back on
Parts Involved
How to Fix
- 1
1. Check the wire connections to the MEMS PBA
- 2
2. Replace the MEMS PBA if connections are normal
Other Error Codes for WV55M9600AV
The washer is getting too much electrical power
The washer's WiFi module cannot connect to the main control board
The washer cannot detect the water level properly
The washer's motor cannot spin or is struggling to turn
The washer is not getting water
The incoming water is too hot for delicate wash cycles
The washer cannot pump the water out
The washer is not getting enough electrical power