Error Code 4C2
The incoming water is too hot for the selected delicate cycle.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 4C2
What This Means
Water temperature sensed higher than 50C during Wool or Lingerie cycle; Hot water supply connected incorrectly
What actually causes this:
The hot and cold water hoses are swapped at the back of the machine, so hot water is flowing in when cold is expected.
First Thing to Check
Check that the hot and cold water hoses at the back of the machine are connected to the correct inlets (not swapped).
Parts Involved
How to Fix
- 1
1. Check whether hot and cold water supply hoses are connected to the correct inlets
- 2
2. Verify water temperature at the hot water tap
- 3
3. Check temperature sensor readings
Other Error Codes for WW22N6850QX
The main board and motor inverter have lost communication.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer cannot pump the water out.
The control panel and the main computer board are not communicating.
The main computer and motor driver boards are not communicating.
The washer's WiFi module is not communicating with the main board.