Error Code 6C7
The sensor that measures how much fabric softener is left has failed.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 6C7
What This Means
Fabric softener level perception sensor fault
What actually causes this:
The sensor that checks the fabric softener level in the auto-dispense reservoir has failed or gotten coated with residue.
First Thing to Check
Remove and thoroughly clean the auto-dispense fabric softener reservoir, then reinsert it.
Parts Involved
How to Fix
- 1
1. Check wire connections to the level sensor
- 2
2. If necessary, replace the ASSY PUMP assembly
Other Error Codes for WW22N6850QX
The main board and motor inverter have lost communication.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer cannot pump the water out.
The control panel and the main computer board are not communicating.
The main computer and motor driver boards are not communicating.
The washer's WiFi module is not communicating with the main board.