Error Code 8C
The vibration sensor board has detected an error.
Moderate
Address soon - your appliance may not work properly
Also displayed as: 8C
What This Means
Error detected in the MEMS PBA; Data error detected from MEMS sensor; Wire connection fault; Main PBA silver nano part malfunction
What actually causes this:
The vibration sensor board (MEMS) has lost its connection or failed internally.
First Thing to Check
Unplug the washer for 60 seconds, plug it back in, and try again.
Parts Involved
How to Fix
- 1
1. Check wire connections to MEMS PBA
- 2
2. Replace the MEMS PBA if connections are good
- 3
3. Check main PBA wire connections
- 4
4. If main PBA silver nano part is malfunctioning, replace main PBA
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for WW22N6850QX
The main board and motor inverter have lost communication.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer cannot pump the water out.
The control panel and the main computer board are not communicating.
The main computer and motor driver boards are not communicating.
The washer's WiFi module is not communicating with the main board.