Error Code dC1
The door lock switch wiring has a fault.
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC1
What This Means
Door lock switch terminal is broken; Intermittent electric wire leakage; Main PCB fault
What actually causes this:
The wiring to the door lock switch has degraded or a terminal pin inside the connector has broken.
First Thing to Check
Try opening and firmly re-closing the door, then restart the cycle.
Parts Involved
How to Fix
- 1
1. Check door lock switch resistance: Type 1 pins 3-5 approx. 1000 Ohm +/-50%; Type 2 pins 2-3 approx. 155-200 Ohm
- 2
2. Check for wire damage or leakage
- 3
3. Check main PBA door sensing circuit
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for WW22N6850QX
The main board and motor inverter have lost communication.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer cannot pump the water out.
The control panel and the main computer board are not communicating.
The main computer and motor driver boards are not communicating.
The washer's WiFi module is not communicating with the main board.