Error Code dC2
The door lock circuit overheated from repeated power cycling.
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC2
What This Means
Power switch turned on/off continually; Too much heat generated in door lock circuit
What actually causes this:
Repeatedly turning the washer on and off in quick succession caused the door lock circuit to overheat.
First Thing to Check
Unplug the washer, wait 10 minutes for it to cool, then plug it back in and try once.
Parts Involved
How to Fix
- 1
1. Check door lock switch and wiring
- 2
2. Check main PBA door sensing circuit
- 3
3. This error is difficult to reproduce — check for signs of heat damage on connectors
Parts Commonly Needed for This Error
OEM part numbers confirmed by retailers
Other Error Codes for WW22N6850QX
The main board and motor inverter have lost communication.
The washer cannot detect the water level correctly.
The washing machine motor is not spinning properly.
The motor is drawing too much power or not reaching the right speed.
The washer cannot pump the water out.
The control panel and the main computer board are not communicating.
The main computer and motor driver boards are not communicating.
The washer's WiFi module is not communicating with the main board.