Error Code EE
EEPROM Error — detected during test mode (1 TIME check)
Moderate
Address soon - your appliance may not work properly
Also displayed as: EE
What This Means
EEPROM on main PCB corrupted or failed
How to Fix
- 1
Step 1: Power cycle the unit. Enter test mode (Power + Start simultaneously) to verify EE code reappears.
- 2
Step 2: If EE persists, replace the main PCB assembly.
Other Error Codes for LDB4548ST
Bubble Error — oversudsing detected
Thermal Error — thermistor resistance output abnormal
Inlet Error — dishwasher does not reach normal water level during fill
Drain Error — dishwasher does not reach normal drain level
Leakage Error — water detected in base pan (float/safety switch triggered)
Excess Error — water fills above normal level; drain pump auto-activates
Heater Error — water not heated or tub temperature exceeds 194°F
Motor Error — wash motor working abnormally