Name: Samsung DV53BB8900HDA2
Brand: Samsung

Question 1

What does error code 3C mean on Samsung DV53BB8900HDA2?

Accepted Answer

The dryer motor isn't spinning properly. Cause: Motor winding failure; Motor connector disconnected; Motor driver circuit failure on inverter PBA; Mechanical obstruction preventing motor rotation.

Question 2

What does error code 9C1 mean on Samsung DV53BB8900HDA2?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Power cord not connected properly; Electrical outlet not working properly; Low or unstable voltage from utility; Faulty outlet or wiring; Voltage sense circuit fault on PCB.

Question 3

What does error code AC6 mean on Samsung DV53BB8900HDA2?

Accepted Answer

The drum motor controller isn't communicating properly. Cause: Faulty Main PBA (main control board); Faulty Inverter PBA; Damaged or loose wire harness between Main PBA and Inverter PBA.

Question 4

What does error code dF mean on Samsung DV53BB8900HDA2?

Accepted Answer

The door switch isn't working properly. Cause: Defective door switch giving invalid readings; Loose or damaged wire connections to door switch; Door switch wiring harness problem.

Question 5

What does error code Door Open mean on Samsung DV53BB8900HDA2?

Accepted Answer

The dryer door is open or not latched properly. Cause: Door not fully closed or latched; Laundry caught in the door preventing proper closure; Defective door latch or door switch.

Question 6

What does error code Draining mean on Samsung DV53BB8900HDA2?

Accepted Answer

The dryer is having trouble draining collected water. Cause: Draining hose bent or damaged; Draining hose frozen; Water tank full; Draining pump malfunction.

Question 7

What does error code FC mean on Samsung DV53BB8900HDA2?

Accepted Answer

Your dryer is getting the wrong type of electrical power. Cause: Not using regular power source frequency (not 60Hz); Power frequency sense circuit fault on PCB; Generator or inverter power supply with unstable frequency.

Question 8

What does error code HC mean on Samsung DV53BB8900HDA2?

Accepted Answer

Your dryer isn't heating properly or is overheating. Cause: Restricted airflow causing compressor to overheat; Refrigerant system problem; Compressor mechanical failure; Heat exchanger severely clogged; Ambient temperature too high for heat pump operation.

Question 9

What does error code tC mean on Samsung DV53BB8900HDA2?

Accepted Answer

Your dryer's temperature sensor isn't reading correctly. Cause: Clogged lint filter restricting airflow; Dirty heat exchanger causing abnormal temperature; Thermistor resistance out of range (open or shorted); Thermistor wiring issue.

Question 10

What does error code tC5 mean on Samsung DV53BB8900HDA2?

Accepted Answer

A secondary temperature sensor is giving bad readings. Cause: Compressor top thermistor resistance out of range; Heater thermistor resistance out of range; Compressor overheating; Thermistor wiring fault.

DV53BB8900HDA2

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
3C	The dryer motor isn't spinning properly	Critical
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
AC6	The drum motor controller isn't communicating properly	Critical
dF	The door switch isn't working properly	Moderate
Door Open	The dryer door is open or not latched properly	Moderate
Draining	The dryer is having trouble draining collected water	Moderate
FC	Your dryer is getting the wrong type of electrical power	Moderate
HC	Your dryer isn't heating properly or is overheating	Critical