Error Code HC
Your dryer isn't heating properly or is overheating
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: HC
What This Means
Restricted airflow causing compressor to overheat; Refrigerant system problem; Compressor mechanical failure; Heat exchanger severely clogged; Ambient temperature too high for heat pump operation
What actually causes this:
Most often caused by a clogged exhaust vent that traps hot air inside the dryer, or the heating element has burned out.
First Thing to Check
Check your exhaust vent — disconnect it from the back of the dryer and look for lint buildup inside.
Parts Involved
How to Fix
- 1
1. Call for service immediately
- 2
2. Check heat exchanger for severe clogging
- 3
3. Check lint filter and duct system for restrictions
- 4
4. Verify ambient temperature is within operating range
- 5
5. Check compressor top thermistor: 200 kOhm +/-3% at 25 degrees C
- 6
6. If compressor is mechanically failed, replace compressor assembly
Other Error Codes for DV53BB8900HDA2
The dryer is having trouble draining collected water
Your dryer is getting the wrong voltage from the outlet
The drum motor controller isn't communicating properly
A secondary temperature sensor is giving bad readings
The dryer motor isn't spinning properly
The door switch isn't working properly
The dryer door is open or not latched properly
Your dryer is getting the wrong type of electrical power