Error Code AC
The dryer's internal parts aren't communicating properly
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: AC
What This Means
Faulty Main PBA (main control board); Faulty SUB PBA (display board); Damaged or loose wire harness between Main PBA and SUB PBA
What actually causes this:
A loose wire connection between the control board and display, or a power surge scrambled the electronics.
First Thing to Check
Unplug the dryer for 2 minutes, then plug it back in — this resets the electronics.
Parts Involved
How to Fix
- 1
1. First check the PCB and wire harness connections between Main PBA and SUB PBA
- 2
2. Inspect wire harness for loose, pinched, cut, or corroded wires
- 3
3. Replace the PCB if the problem persists
- 4
4. Replace SUB PBA first (more commonly at fault), then Main PBA if error continues
Other Error Codes for DVE47CG3500VAC
The door switch isn't working properly
The vent blockage test found a problem with your exhaust
Your dryer is getting the wrong type of electrical power
Your dryer detected restricted airflow during a vent test
The dryer thinks the door is open while running
Your dryer's temperature sensor isn't reading correctly
Your dryer isn't heating properly or is overheating
A button on the control panel is stuck or shorted