Error Code dC
The dryer thinks the door is open while running
Moderate
Address soon - your appliance may not work properly
Also displayed as: dC
What This Means
Door not fully closed or latched; Door sensor unit is loose or has a short; Defective door switch; Loose or damaged wire terminals in door sense circuit
What actually causes this:
Door wasn't closed firmly, or the door switch has gone bad from normal wear.
First Thing to Check
Open and firmly close the door, then try starting it again.
Parts Involved
How to Fix
- 1
1. Close the door firmly and attempt to run the dryer again
- 2
2. Check if the door sensor unit is loose or shorted
- 3
3. Inspect wire harness connections to door switch
- 4
4. Test door switch: Door open - COM-NC (pins 1-3) should be < 1 ohm, COM-NO (pins 1-2) should be infinity
- 5
5. Test door switch: Door closed - COM-NC (pins 1-3) should be infinity, COM-NO (pins 1-2) should be < 1 ohm
- 6
6. Replace door switch if readings are incorrect
Other Error Codes for DVE54CG7155DAC
The dryer's internal parts aren't communicating properly
Your dryer is getting the wrong voltage from the outlet
Your dryer vent is clogged and needs cleaning
Your dryer vent is about 80% blocked
Your dryer vent is over 90% blocked — needs immediate cleaning
The vent blockage test found a problem with your exhaust
Your dryer detected restricted airflow during a vent test
Your dryer is getting the wrong type of electrical power