Error Code CLg
Your dryer vent is clogged and needs cleaning
Moderate
Address soon - your appliance may not work properly
Also displayed as: CLg
What This Means
Lint accumulation in the lint filter; Lint buildup in exhaust duct; Crushed or kinked exhaust ductwork; Blocked external exhaust hood; Excessively long duct run or too many elbows
What actually causes this:
Lint has built up inside the exhaust vent over time, restricting airflow and making your dryer work harder.
First Thing to Check
Pull the dryer away from the wall and disconnect the exhaust vent hose — check for packed lint inside.
Parts Involved
How to Fix
- 1
1. Clean the lint filter
- 2
2. Check the vent condition and clean the exhaust duct
- 3
3. Inspect external exhaust hood for blockage
- 4
4. Refer to ducting requirements section of installation manual
- 5
5. You must take corrective measures (such as cleaning) through expert personnel
This Error Applies To
Samsung DV54CG7 Series Dryers (2024) (2024–present)
Related Error Codes
The dryer thinks the door is open while running
Your dryer is getting the wrong type of electrical power
The dryer's internal parts aren't communicating properly
Your dryer is getting the wrong voltage from the outlet
Your dryer isn't heating properly or is overheating
Your dryer's temperature sensor isn't reading correctly
A button on the control panel is stuck or shorted
The door switch isn't working properly