Error Code FC
Your dryer is getting the wrong type of electrical power
Moderate
Address soon - your appliance may not work properly
Also displayed as: FC
What This Means
Not using regular power source frequency (not 60Hz); Power frequency sensor circuit fault on PCB; Generator or inverter power supply with unstable frequency
What actually causes this:
The power supply frequency is outside the expected range — usually a generator or unstable power issue.
First Thing to Check
If you're running the dryer on a generator, try plugging it into a regular wall outlet instead.
Parts Involved
How to Fix
- 1
1. Try restarting the cycle
- 2
2. Verify the power source is providing standard 60Hz frequency
- 3
3. Check if dryer is connected to a generator or inverter — these may not provide stable 60Hz
- 4
4. Inspect power frequency sensor circuit on main PCB
- 5
5. Test with known good 60Hz power source
Other Error Codes for DVG45A6400V
Your dryer is getting the wrong voltage from the outlet
A secondary temperature sensor is giving bad readings
Your dryer's temperature sensor isn't reading correctly
A button on the control panel is stuck or shorted
Your dryer isn't heating properly or is overheating
The door switch isn't working properly
Your dryer detected restricted airflow during a vent test
The dryer motor isn't spinning properly