Name: Samsung DVG45R6100C
Brand: Samsung

Question 1

What does error code 9C1 mean on Samsung DVG45R6100C?

Accepted Answer

Your dryer is getting the wrong voltage from the outlet. Cause: Power supply voltage out of acceptable range; Blown fuse or tripped circuit breaker causing partial power loss; Faulty outlet wiring or loose terminal connections; PCB voltage sensing circuit malfunction; Wire harness damage.

Question 2

What does error code AC mean on Samsung DVG45R6100C?

Accepted Answer

The dryer's internal parts aren't communicating properly. Cause: Faulty main PCB; Faulty display PCB; Damaged or loose wire harness between main PCB and display PCB; Corroded or oxidized connector pins.

Question 3

What does error code bC2 mean on Samsung DVG45R6100C?

Accepted Answer

A button on the control panel is stuck or shorted. Cause: Display PCB key circuit is loose or shorted; Stuck button on control panel; Moisture or debris on control panel causing short; Defective display PCB.

Question 4

What does error code dC mean on Samsung DVG45R6100C?

Accepted Answer

The dryer thinks the door is open while running. Cause: Door not fully closed or latched; Door sensor unit is loose; Door sensor unit has a short circuit; Damaged door latch or striker.

Question 5

What does error code dF mean on Samsung DVG45R6100C?

Accepted Answer

The door switch isn't working properly. Cause: Door sensor unit is loose; Door sensor unit has a short circuit; Defective door switch giving conflicting readings; Damaged wiring to door switch.

Question 6

What does error code FC mean on Samsung DVG45R6100C?

Accepted Answer

Your dryer is getting the wrong type of electrical power. Cause: Power source is not providing standard 60Hz frequency; Dryer connected to generator or inverter with unstable frequency; Power frequency sensor circuit fault on PCB.

Question 7

What does error code HC mean on Samsung DVG45R6100C?

Accepted Answer

Your dryer isn't heating properly or is overheating. Cause: Restricted vent system causing excessive heat buildup; Thermistor failure or resistance out of range; Heater malfunction (open or shorted element); Thermostat failure; PCB malfunction in temperature monitoring circuit; Compressor terminal wiring desorption (pin connection issue).

Question 8

What does error code tC mean on Samsung DVG45R6100C?

Accepted Answer

Your dryer's temperature sensor isn't reading correctly. Cause: Clogged lint screen restricting airflow and causing abnormal temperature readings; Restricted vent system causing heat buildup and abnormal thermistor readings; Thermistor 1 resistance out of range (open or shorted); Faulty wiring connection between thermistor and main PCB.

Question 9

What does error code tC5 mean on Samsung DVG45R6100C?

Accepted Answer

A secondary temperature sensor is giving bad readings. Cause: Clogged lint screen restricting airflow; Restricted vent system causing heat buildup; Thermistor 2 resistance out of range (open or shorted); Faulty wiring connection between thermistor 2 and main PCB.

DVG45R6100C

Error Codes

On this page

Warranty

Samsung Support

Track your Samsung

Code	Meaning	Severity
9C1	Your dryer is getting the wrong voltage from the outlet	Critical
AC	The dryer's internal parts aren't communicating properly	Critical
bC2	A button on the control panel is stuck or shorted	Moderate
dC	The dryer thinks the door is open while running	Moderate
dF	The door switch isn't working properly	Moderate
FC	Your dryer is getting the wrong type of electrical power	Moderate
HC	Your dryer isn't heating properly or is overheating	Critical
tC	Your dryer's temperature sensor isn't reading correctly	Moderate