Error Code 9C1
Your dryer is getting the wrong voltage from the outlet
Critical
Stop using immediately - risk of damage or safety issue
Also displayed as: 9C1
What This Means
Abnormal or out-of-range power source voltage; Low voltage from utility; Faulty outlet or home wiring; Voltage sense circuit fault on main PCB
What actually causes this:
The electrical outlet isn't providing the right power — could be a tripped breaker, loose plug, or wiring issue.
First Thing to Check
Check your electrical panel and make sure the dryer's breaker hasn't tripped — flip it fully off then back on.
Parts Involved
How to Fix
- 1
1. Check the PCB and wire harness connections
- 2
2. Measure voltage at the outlet: should be 120V/240V (Electric) or 120V (Gas)
- 3
3. Check for blown fuse or tripped circuit breaker in the home
- 4
4. Verify dryer is on a dedicated circuit
- 5
5. If voltage is correct, inspect voltage sense circuit on main PCB
- 6
6. Replace main PCB if voltage is confirmed correct
Other Error Codes for DVG54CG7150DA3
The dryer's internal parts aren't communicating properly
Your dryer vent is clogged and needs cleaning
Your dryer vent is about 80% blocked
Your dryer vent is over 90% blocked — needs immediate cleaning
The vent blockage test found a problem with your exhaust
Your dryer detected restricted airflow during a vent test
The dryer thinks the door is open while running
Your dryer is getting the wrong type of electrical power