Error Code GAS

Gas supply failure – gas not being supplied to the dryer (gas model only)

Also displayed as: GAS

How to Fix

1. 1

   Confirm the house gas shutoff valve is fully open.

2. 2

   Confirm the dryer gas shutoff valve (within 6 ft of the dryer) is fully open.

3. 3

   Check that the gas line is properly connected to the dryer's 3/8-inch NPT gas inlet.

4. 4

   Verify gas supply is active (check other gas appliances in the home).

5. 5

   If gas supply is confirmed and error persists, run Normal cycle and check voltage at Valve 1 terminal: should be DC 90Vdc or more during ignition phase.

6. 6

   If voltage at Valve 1 is present (≥90Vdc) but gas does not ignite → Check igniter and flame detector.

7. 7

   Measure gas valve coil resistances: Valve 1 = 1.5kΩ–2.5kΩ, Valve 2 = 1.5kΩ–2.5kΩ. If out of range → Replace gas valve.

8. 8

   Check that gas valve nozzle is not clogged. Remove any foreign body if found.

9. 9

   If still unresolved → Replace main PCB.

This Error Applies To

LG DLE8400VE Series Dryers