Error Code PF
Power failure - house fuse blown or circuit breaker tripped, or power outage occurred
Moderate
Address soon - your appliance may not work properly
Also displayed as: PF
How to Fix
- 1
Check house fuse or circuit breaker and reset breaker or replace fuse.
- 2
Do not increase fuse capacity beyond rated amperage.
- 3
If the problem is a circuit overload, have it corrected by a qualified electrician.
- 4
Verify outlet voltage is 208–240 VAC ±10% for electric dryer.
- 5
Check power cord connection at terminal block for proper wiring (white neutral to center, red and black to outer terminals).
This Error Applies To
LG DLEX4200B Series Dryers
Related Error Codes
No power / power supply issue - electric dryer power cord not connected or house power supply incorrect
Steam water supply pump failure detected in test mode
Thermistor of blower housing - Outlet thermistor open or shorted
Power supply wire connection wrong or loose (Black-White-Red)
NFC module open or shorted
Exhaust ductwork approximately 80% blocked - FlowSense alert
NFC module type is wrong
Exhaust ductwork approximately 90-95% blocked - FlowSense alert